- Walnut Oak
The Kaldr Storage Bed | Walnut Oak Finish Slatted Headboard
All taxes & duties included worldwide · DDP delivery · No hidden costs
Estimated Shipping Widget will be displayed here!

Estimated Shipping Widget will be displayed here!
— THE SANCTUARY
The Kaldr in Walnut Oak finish reads like a library in the final hour of daylight. The deep, saturated stain draws out the grain of each vertical slat and deepens it, forty-seven narrow columns of burnished timber spanning the full 45-inch headboard. The shadows between the slats become part of the composition, rhythmic and architectural, like the colonnades of an old reading room. Beneath, the storage base holds its silence. This is the Kaldr for rooms with thick rugs, warm lamps, and books that do not require introduction.
— THE ANATOMY
Milled from Grade-A European Oak — FSC certified, kiln-dried to 8% moisture content. The Walnut Oak finish is achieved through a hand-applied water-based stain that penetrates deep into the grain, followed by three coats of natural penetrating oil at a satin sheen. The result is a rich mid-brown saturation that reads as genuine rather than applied. The 114.3 cm (45 in) headboard is composed of individually milled vertical solid oak slats, each mortise-seated into continuous upper and lower rails. Italian-engineered hydraulic gas-lift pistons elevate the full FSC beech slat platform (18 slats, graduated ergonomic flex tension, 24.1 cm / 9½ in above the floor) to reveal storage equal to the full mattress footprint. The footboard stands at 30.5 cm (12 in). No veneers. No MDF. No composite. All structural junctions: mortise-and-tenon, reinforced with hidden marine-grade stainless steel dowels.
— THE HULMARA PROMISE
Every Kaldr frame carries its maker’s signature and build date. Static load-tested to 480 kg (1,058 lbs), dynamic-tested to 340 kg (750 lbs) under the Hulmara Silent-Sleep protocol: zero audible movement, zero joint migration over 10,000 cycles. The hydraulic lift mechanism is cycle-tested to 25,000 open-close repetitions and covered by a 10-year mechanical warranty. Available in Double (137 × 191 cm / 54″ × 75″), Queen (153 × 215 cm / 60″ × 84″), King (183 × 215.5 cm / 72″ × 84″), and California King (183 × 213 cm / 72″ × 83″). Custom dimensions by arrangement: contact@hulmara.com.
— ARCHITECT'S SPECIFICATION TABLE
|
Material |
Grade-A White Oak, FSC Certified, Kiln-Dried to 8% MC |
|
Headboard Design |
Vertical Slat Array, Solid Oak, Full-Width Architectural Panel |
|
Storage Mechanism |
Hydraulic Gas-Lift, Italian-Engineered Pistons, Full-Base Lift |
|
Joinery Method |
Mortise & Tenon Frame Joints, Hidden Marine-Grade Steel Reinforcement |
|
Surface Finish |
Hand-Applied Natural Penetrating Oil, Satin Sheen |
|
Headboard Height |
114.3 cm / 45 in |
|
Footboard Height |
30.5 cm / 12 in |
|
Floor to Top of Slats |
24.1 cm / 9½ in |
|
Slat System |
FSC Beech, 18 Slats, Graduated Ergonomic Flex Tension, Hydraulic Lift Frame |
|
Certifications |
FSC Certified Timber | OEKO-TEX Standard 100 |
|
Bespoke Customisation |
Custom dimensions, bespoke finishes, and proportional adjustments available on request — contact@hulmara.com |
|
Lead Time |
8–16 Weeks, Handcrafted to Order |
|
Delivery |
White-Glove Installation Not Included |
Specifications
Please review the full product description carefully to confirm materials, dimensions, and available options. If you require customization, special sizing, or fabric, contact us directly for a personalized quotation. Send your request to contact@hulmara.com including the product name or reference code.
Hulmara
Clean with dry cloth
Built Different, Built Forever
Here's what separates a Hulmara bed from mass-market furniture.
Master-Grade White Oak
From responsibly managed forests. Each piece is hand-selected for its grain character, density, and structural integrity.
Anti-Warp Engineering
Engineered for stability, so every panel stays crisp, flat and true for decades.
Silent Joinery
Heavy-duty bed-bolt hardware and traditional mortise-and-tenon joints. 30–40mm thick rails — zero squeaks, zero vibration.
Orthopedic Beech Slats
Premium European Beech slats (18–20mm) for superior strength, natural spring, and optimal airflow for your mattress.
Hand-Sanded 2K Finish
Every bed is hand-sanded and sealed with a diamond-tough 2K performance lacquer. Natural wood character with stain-proof protection.
Solid Oak Frame. No Shortcuts.
A solid European oak frame, real wood surfaces and precision joinery. What you see is what you get.
Inside the Workshop
Five to six weeks at the bench, from raw timber to your approval video.
01 Timber Selection Week 1
Every bed begins with a single board. European oak is chosen for grain consistency, density, and character. Boards that fall short are set aside before a single cut is made.
02 Milling & Joinery Weeks 1–2
Mortise-and-tenon joints are cut by hand and machine in sequence. No cam locks, no dowels, no shortcuts. Each joint is test-fitted dry before final assembly.
03 Shaping & Detailing Weeks 2–3
Panels, edges and signature details are shaped to the design of your piece. Corners are softened by hand and every surface is sanded through four grits.
04 Hand Finishing Weeks 3–5
Three coats of low-VOC matte lacquer, hand-sanded between each layer. The finish is designed to develop a subtle patina over decades — a living surface, not a sealed one.
05 Inspection & Documentation Weeks 5–6
Your completed bed is photographed and filmed before packing, and sent to you for approval. A verified record of your exact piece.
A $2,595 Bed That Costs Less
Than the Alternative
Furniture that lasts isn't expensive. Furniture you replace every 4 years is.
Solid wood, mortise & tenon · built for 25+ years
Over 25 years: $2,595
MDF · cam locks · 3–5 year life
Over 25 years: $5,625
✓ Custom Sizing — Non-standard room? We'll adjust the length, width, or headboard height to fit your space perfectly.
✓ Alternative Wood Finishes — Beyond the finishes shown here, choose from our full library of tones — from bleached driftwood to deep espresso.
✓ Fabric & Upholstery — For our upholstered collection, select your own linen, bouclé, or velvet to match your bedroom palette.
✓ Modified Construction — Need an adjusted slat system, specific mattress height, or integrated storage? We'll engineer it.
How it works: Simply reach out with your idea — a sketch, a photo, a description. A dedicated account manager will be personally assigned to guide you through material selection, dimensions, and pricing. No obligation, no pressure. Just expert advice from people who love building beautiful furniture.
No obligation quote · Dedicated account manager · Same master-grade oak
Logistics
Every bed is made to order. Allow 8 to 12 weeks from order to your door: 5 to 6 weeks in our workshop, then 3 to 4 weeks for insured, duty-paid delivery.
5 to 6 weeks, including photo and video approval of your finished bed before it is packed. As every piece is handmade, please allow up to a week of margin.
3 to 4 weeks, door to door, with all taxes and duties included.
We'd Rather You Ask Now
Than wonder later.
I've seen beds that look identical for a fifth of the price.
What you've seen is printed MDF with a photograph of oak laminated onto a hollow-core panel, held together with cam locks designed to last three to five years. A Hulmara bed is built on a solid European oak frame with mortise-and-tenon joinery engineered to last decades. The material cost alone exceeds the retail price of most flat-pack alternatives. These are fundamentally different products that happen to share a silhouette.
Eight to twelve weeks is too long. I need a bed now.
Your bed doesn't exist yet — and that's the point. We don't hold inventory because every piece is built to your exact specifications after you order. This is how bespoke furniture has always been made: Savile Row suits, custom kitchens, fine cabinetry. The alternative is warehouse stock in limited sizes and finishes, with the compromises that entails. If you're furnishing a primary bedroom, a two-to-three-month wait for a piece built to last decades is a very good trade.
How do I trust quality on a purchase I can't see in person?
Three safeguards. First, we ship complimentary wood and finish samples to your door — you'll feel the weight and grain before you commit. Second, every completed bed is professionally photographed and filmed before packing; you'll see your exact piece, not a stock image. Third, standard collection pieces carry a thirty-day return window. We assume the risk because we know what arrives will exceed your expectations.
Is 'handmade' real, or is that marketing language?
It's real. Every Hulmara bed is designed in London and made to order by hand: the joints are milled and test-fitted, the surfaces hand-sanded between lacquer coats, and each piece is signed off before it leaves. We photograph and film your finished bed as proof.
What if the colour doesn't match my room in person?
Our product photography is colour-calibrated to be as accurate as possible, but we always recommend ordering a free finish sample first — it takes five to seven days. For bespoke finishes, we can colour-match to a photo or physical sample you provide. If a standard collection piece doesn't work in your space, you have thirty days to return it.
Why should I choose you over a well-known luxury furniture brand?
Large luxury retailers deliver excellent product within a business model that funds global showroom networks, designer licensing, and retail staff — their margins reflect that overhead. Hulmara delivers the same material grade and construction standard direct to your door, without the markup that pays for marble lobbies and high-street leases. The oak is the same. The joinery is the same. The price difference is real estate and retail theatre.
I'm an interior designer. Do you offer trade pricing?
Our Trade Programme offers preferential pricing, dedicated account management, priority production slots, and COM (Customer's Own Material) coordination for upholstered pieces. Many of our clients come through the design trade. Apply at hulmara.com/trade-accounts or reach out directly to discuss your project.
Where Your Investment Goes
| Hulmara | Luxury Showroom Brands | Mass Market | |
|---|---|---|---|
| Material | Solid European oak frame | Solid hardwood (varies) | MDF / Particle board |
| Joinery | Mortise & tenon | Varies by line | Cam locks & dowels |
| Finish | Hand-applied, 3 coats | Factory-applied | Printed laminate |
| Bespoke Options | Full customisation | Limited selection | None |
| King Price Range | $2,495 – $5,295 | $4,500 – $12,000+ | $400 – $1,200 |
| Expected Lifespan | 20–30 years | 15–25 years | 3–5 years |
| Duties & Shipping | Included (DDP) | Often additional | Varies |
| Pre-Ship Documentation | Photo & video record | Rarely | Never |











